ESD Clothing

ESD safe clothing is made using Fabric consisting of 96% Polyester and 4% conductive fibers can be supplied in many different forms such as knee length coats, aprons, caps, pants, booties and bunny suits. The fabric is compatible in cleanrooms as well. The apparel is stitched together using a conductive silver impergnated thread to ensure lifelong conductivity. The apparel is stitched in standard sizes-Small S, Medium M, Large L and Extra Large XL sizes. The garments can also be stitched as per customer specifications incorporating pockets, logos and other features to suit different requirements of the operators.

DUPONT TYVEK SUIT

TYVEK® is air and water vapour permeable, yet repels water-based liquids and aerosols. It acts as an excellent barrier against particles and fibres. It is low-linting and also antistatically treated.Therefore it also helps to prevent human contamination of products and processes in clean-room environments.

Application

• Agrochemical handling
• Asbestos
• Automotive industry
• Chemical industry
• Cleanroom applications
• Contaminated land clean-up
• Electronics
• Emergency response services
• Food processing
• Decontamination of contaminated land and work sites
• Disease management
• Disposal of hazardous materials
• Industrial cleaning and maintenance
• Medical applications and exposure to biological hazards
• Nuclear industry
• Pharmaceuticals

DUPONT PROSHIELD

• Good particle and liquid repellency
• Medium durability
• Good water vapour and low air penetration

Applications

• Short time exposure to oils (car, automotive)
• Exposure to colour and paint spraying (fi nishing)
• Limited level of exposure as defi ned by Type 5 and Type 6

DUPONT TYCHEM C

The TYCHEM® range offers lightweight comprehensive protection starting at low toxic chemicals up to high toxic gases and biological hazards. Companies operating in such widely differing sectors as the chemical and pharmaceutical industry, the gas supply sector and the varnishing industry use combustible materials that can create potentially explosive atmospheres. These ‘explosive protection zones’ or ‘EX-zones’ are classified into various categories depending on the frequency and length of time that the hazard exists.

Applications

• Agrochemical handling
• Bio engineering
• Chemical industry
• Civil protection
• Decommissioning of production plants
• Decontamination of contaminated land
• Disease and disaster management
• Disposal of hazardous materials
• Emergency response services, spill clean-up and accident interventions
• Fire brigades
• Industrial cleaning and maintenance
• Medical applications and exposure to biological hazards
• Military applications
• Oil handling, oil tanker cleaning
• Pharmaceutical industry
• Tank cleaning, inspection and maintenance
• Nuclear industry

TYCHEM F

Benefits for wearer’s safety and comfort of the TYCHEM® garment offering

• Combination of chemical and biological protection
• Innovative design features for increased protection and enhanced comfort
• Lightweight garments helping workers to perform at their best
• For applications where decontamination is needed, the fabric is resistant to commonly used decontamination substances
• No halogen compounds, so can be disposed of via standard means.

Applications:

• Agrochemical handling
• Bio engineering
• Chemical industry
• Civil protection
• Decommissioning of production plants
• Decontamination of contaminated land
• Disease and disaster management
• Disposal of hazardous materials
• Emergency response services, spill clean-up and accident interventions
• Fire brigades
• Industrial cleaning and maintenance
• Medical applications and exposure to biological hazards
• Military applications
• Oil handling, oil tanker cleaning
• Pharmaceutical industry
• Tank cleaning, inspection and maintenance
• Nuclear industry

BOILER SUIT

100% cotton and can be customised as per customer requirement. Highly visible with reflective tapes.

• Made for general
• Protective use in high temperature Environments
• Boiler suits are manufactured in two main types: heat resistant and heat and electric arc resistant.

ALUMINIZED 3 layer suit

Outer Layer:- Z-Flex F-407 (60”)- Aluminised Fibreglass (490 gem ) – 0.45 mm & certified to EN 532, EN 366, EN 388, EN 367, EN 407& ISO11612:2008.

Middle Layer:- Vapour barrier

Innermost Layer:- Woolen

Suit Consist of:-

• One piece coverall. Or Pant and Shirt
• A hood with visor and inbuilt helmet
• A pair of five-finger gloves.
• A pair of boots with leather lining, anti-skid design rubber sole, zip fastener. Size of boot 7 or 8 or 9 and height will be approximately 7".

FIRE PROXIMITY SUIT

Outer Layer:- Z-Flex F-407 (60”)- Aluminised Fibreglass (490 gem ) – 0.45 mm & certified to EN 532, EN 366, EN 388, EN 367, EN 407& ISO11612:2008

Middle Layer:- Vapour barrier

Innermost Layer:- Woolen

Suit Consist of:-

• One piece coverall. Or Pant and Shirt
• A hood with visor and inbuilt helmet
• A pair of five-finger gloves.
• A pair of boots with leather lining, anti-skid design rubber sole, zip fastener. Size of boot 7 or 8 or 9 and height will be approximately 7".

NOMEX FIRE SUIT

Nomex Fire Fighting Suit Consisting Of Jacket, Trouser with Pab Helmet & Knitted Hood, Fire Fighting Hand Gloves, Fireman Boot.

Nomex 111 A , Fire Fighter Jacket & Trouser Certified To EN 469 Standard

Nomex Three Layer Suits:-

• Standard: CE EN469 approved
• Outer fabric: Nomex IIIA. 200g/square meters
• Moisture Layer: 50% Nomex/50% viscose coated PTFE membrane.
• Thermal layer Carbon felt laminate with 50% Nomex 50% viscose comfortable face cloth.

Specification :

• Double close front, Velcro fixing device and safety zipper.
• Throat safeguard design adjust by Velcro fixing device
• Double supper large pocket on the frock and pants, one radio pocixets on the chest and a Concealed paper pocket between double close fronts.
• Cuff can be adjusted by Velcro and with fireproof, waterproof and thumb ring design.
• Extra patches shall be placed to the bottom of jacket's arms to increase the movement capacity.
• The reflector bands shall be sewed as rounded to the cuffs, foot, chest and the back parts of the jackets.
• Waist of the trouser shall be higher at least 30 cm than jacket's foot.
• Elastic girdle and Elastic suspenders shall be easily opening-locking and adjustable clips.
• The sewing thread shall be fire proof thread.

Fire Fighting Hand Gloves:-

• Outer Shell : Heat Resistant Fr Leather
• Second Layer : Aramid Knit Fabric
• Lining : Membrane
• Thermal Final Layer : Fr Fleece Fabric
• Retro Reflective Trim On Back Side
• Approval To EN 659 & EN 388

Fire Fighter Anti Flash Hood:-

• Nomex ( Aramid ) Knitted Fabric
• Approval To EN 13911

Fire Fighting Boot:-

Fire Fighter Boot Certified To EN ISO 15090 Standard

SCBA ENCAPSULATED SUITT

To be used along with the self contained breathing apparatus. To protect from high level of chemical spillage /leakage /ammonia leakage etc